Enabling NES on individual ports

Use the following procedure to turn on NES for individual ports on a switch or stack.

Procedure steps
Step Action
1

From the navigation tree, double-click Power Management.
2

In the Power Management tree, double-click Energy Saver.
3

In the work area, click the Ports tab.
4

In the Multiple Port Configuration area, click the Switch/Stack/Ports elipsis (...).
5

Click a port or ports, or click All.
6

Click Ok.

The portlist appears in the Switch/Stack/Ports box.
7

In the Multiple Port Configuration areadouble-click the cell under EnergySaverEnabled.

A downward arrow appears.
8

Click the arrow.

A list appears.
9

Click true.
10

Click Apply Selection.
11

On the toolbar, click Apply.
12

Repeat steps 4 to 11 to enable NES for additional ports as required.

13

Click Apply.
14

On the toolbar, you can click Refresh to update the work area data display.
--End--

The following table describes the fields of the Ports tab.

Variable definitions

Field Description
Port Indicates the port.
EnergySaverEnabled Indicates whether the Nortel Energy Saver feature is enabled for the port.