With the Local Protocol VLAN tab, you can view LLDP Protocol VLAN properties for the local system.
To view LLDP protocol VLAN properties:
Procedure steps
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-click Edit. |
| 2 |
From the Edit tree, double-click Diagnostics. |
| 3 |
From the Diagnostics tree, double-click 802.1AB. |
| 4 |
From the 802.1AB tree, double-click Port dot1. |
| 5 |
Select the Local Protocol VLAN tab. |
|
|
|
| --End-- | |
|
|
|
The following table outlines the parameters of the Port dot1 Local Protocol VLAN tab.
Variable definitions
| Variable | Value |
|---|---|
| PortNum | Port number. |
| ProtoVlanId | The ID of the port and protocol VLANs associated with the local port. A value of zero is used if the system does not know the protocol VLAN ID (PPVID). |
| ProtoVlanSuported | Indicates whether the local port supports port and protocol VLANs. |
| ProtoVlanEnabled | Indicates whether the port and protocol VLANs are enabled on the local port. |
| ProtoVlanTxEnable | Indicates whether the corresponding local port and protocol VLAN information are transmitted from the port. |