With the Neighbor VLAN Name tab, you can view LLDP VLAN Name properties for the remote system.
To open the Neighbor VLAN Name tab:
Procedure steps
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-click Edit. |
| 2 |
From the Edit tree, double-click Diagnostics. |
| 3 |
From the Diagnostics tree, double-click 802.1AB. |
| 4 |
From the 802.1AB tree, double-click Port dot1. |
| 5 |
Select the Neighbor VLAN Name tab. |
|
|
|
| --End-- | |
|
|
|
The following table outlines the parameters of the Port dot1 Neighbor VLAN Name tab.
PVariable definitions
| Vaiable | Value |
|---|---|
| TimeMark | The TimeFilter for this entry. |
| LocalPortNum | Identifies the local port on which the remote system information is received. |
| Index | An arbitrary local integer value used by this agent to identify a particular MSAP. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. |
| VlanId | The integer value used to identify the IEEE 802.1Q VLAN IDs with which the remote port is compatible. |
| VlanName | The VLAN name identified by the VLAN ID associated with the remote system. |