Use the following procedure to configure advanced EAPOL security parameters for an individual port or multiple ports.
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
In the Device Physical View, select a port. |
| 2 |
Right-click the selected Port. |
| 3 |
In the shortcut menu, click Edit.
The Port tab appears. |
| 4 |
In the work area, click the EAPOL Advance tab. |
| 5 |
Configure the parameters as required. |
| 6 |
In the toolbar, click Apply. |
|
|
|
| --End-- | |
|
|
|
The following table describes the fields of the port-based EAPOL Advance tab.
| Variable | Value | |
|---|---|---|
| GuestVlanEnabled | Enables or disables Guest VLAN functionality. | |
| GuestVlanId | Specifies the VLAN ID of the VLAN that acts as the Guest VLAN. The default is 2. The Guest VLAN ID can be between 0 and 4094.
|
|
| MultiHostEnabled | Enables or disables Multiple Host/MAC support with Multiple Authentication (MHMA). | |
| MultiHostEapMaxNumMacs | Specifies the maximum number of EAPOL-authenticated clients allowed on this port. The default is 2. The maximum number can be between 1 and 32. | |
| MultiHostAllowNonEapClient | Enables or disables support for non-EAPOL clients using local authentication. | |
| MultiHostNonEapMaxNumMacs | Specifies the maximum number of non-EAPOL clients allowed on this port. The default is 1. The maximum number can be between 1 and 32. | |
| MultiHostSingleAuthEnabled | Enables or disables Multiple Host with Single Authentication (MHSA) support for non-EAPOL clients. | |
| MultiHostRadiusAuthNonEapClient | Enables or disables support for non-EAPOL clients using RADIUS authentication. | |
| MultiHostAllowNonEapPhones | Enables or disables support for Nortel IP Phone clients as another non-EAP type. | |
| MultiHostAllowRadiusAssignedVlan | Enables or disables support for VLAN values assigned by the RADIUS server. | |
| MultiHostAllowNonEapRadiusAssignedVlan | Enables or disables support for non-EAP VLAN values assigned by the RADIUS server. | |
| MultiHostUseMostRecentRadiusAssignedVlan | Enables or disables the use of the most recent VLAN values assigned by the RADIUS server. | |
| MultiHostEapPacketMode | Specifies the mode of EAPOL packet transmission (multicast or unicast). | |
| EapProtocolEnabled | Enables or disables processing of EAP protocol packets. | |
| ProcessRadiusRequestsServerPackets | Enables or disables the processing of RADIUS request server packets. |