Viewing port non-EAP host support status using EDM

Use the following procedure to display the status of non-EAP host support on the port.

Prerequisites

Procedure steps
Step Action
1

In the Device Physical View, select a port.
2

Right-click the selected Port.
3

In the shortcut menu, click Edit.

The Port tab appears.
4

In the work area, click the EAPOL Advance tab.
5

In the toolbar, click Non-EAP MACHost.

The Non-EAP MAC, Port tab appears.
6

In the work area, click the Non-EAP Status tab
--End--

Variable definitions

Use the data in the following table to view port non-EAP host support status.

Variable Value
PortNumber Specifies the port number in use.
ClientMACAddr Specifies the MAC address of the client.
State Specifies the authentication status. Possible values are:
  • rejected: the MAC address cannot be authenticated on this port.
  • locallyAuthenticated: the MAC address was authenticated using the local table of allowed clients.
  • radiusPending: the MAC address is awaiting authentication by a RADIUS server.
  • radiusAuthenticated: the MAC address was authenticated by a RADIUS server.
  • adacAuthenticated: the MAC address was authenticated using ADAC configuration tables.
  • mhsaAuthenticated: the MAC address was auto-authenticated on a port following successful. authentication of an EAP client.
Reauthenticate Specifies the value used to reauthenticate the MAC address of the client on the port.