Use the following procedure to enable the EAPOL multihost Fail Open VLAN.
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-clickSecurity. |
| 2 |
In the Security tree, double-click 802.1X/EAP. |
| 3 |
On the EAPOL tab, select the MultihostFailOpenVlanEnabled option. |
| 4 |
On the toolbar, click Apply. |
|
|
|
| --End-- | |
|
|
|
The following example procedure specifies the use of VoIP VLAN and Fail Open VLAN.
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
Specify VoIP VLANs. These must not be Fail Open VLANs or Guest VLANs on any port. |
| 2 |
Specify Fail Open VLAN. This must not be VoIP VLANs or Guest VLANs on any port. |
| 3 |
Specify Guest VLANs. These must not be VoIP VLANs or Fail Open VLANs. |
| 4 |
Enable non-phone-enable on a specific port and globally. |
| 5 |
Enable GuestVlan on the same port and globally. |
| 6 |
Enable FailOpen globally. |
|
|
|
| --End-- | |
|
|
|