Use the following procedure to enable or disable ARP inspection on one or more VLANs.
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-click Security. |
| 2 |
In the Security tree, double-click Dynamic ARP Inspection (DAI). |
| 3 |
In the work area, click the ARP Inspection-VLAN tab. |
| 4 |
In the table, double-click the cell under the column heading ARPInspectionEnabled for a VLAN. |
| 5 |
Select a value (true or false) to enable or disable ARP Inspection-VLAN. |
| 6 |
Repeat the previous two steps for additional VLANs as required. |
| 7 |
In the toolbar, click Apply. |
|
|
|
| --End-- | |
|
|
|
Use the data in the following table to configure ARP inspection on a VLAN.
| Variable | Value |
|---|---|
|
VlanId |
Identifies VLANs configured on the switch. |
|
ARPInspectionEnabled |
Enables or disables ARP inspection on a VLAN. |