Perform this procedure to create a TACACS+ server.
Procedure steps
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-click Security. |
| 2 |
Double-click TACACS+. |
| 3 |
In the work area, click the TACACS+ Server tab. |
| 4 |
On the toolbar, click Insert to open the Insert TACACS+ Server dialog. |
| 5 |
In the AddressType field, click ipv4. |
| 6 |
In the Address field, enter the IP address of the TACACS+ server. |
| 7 |
In the PortNumber field, enter the TCP port on which the client establishes a connection to the server. |
| 8 |
In the Key field, enter the secret key shared with this TACACS+ server. |
| 9 |
In the Confirm Key field, reenter the secret key shared with this TACACS+ server. |
| 10 |
In the Priority field, click Primary or Secondary to determine the order in which the TACACS+ server is used. |
| 11 |
Click Insert to accept the change and return to the work area. |
| 12 |
On the toolbar, click Apply to apply the change to the configuration. |
|
|
|
| --End-- | |
|
|
|
Variable definitions
| Variable | Value |
|---|---|
| AddressType | Specifies the type of IP address used on the TACACS+ server. |
| Address | The IP address of the TACACS+ server referred to in this table entry. |
| PortNumber | The TCP port on which the client establishes a connection to the server. A value of 0 indicates that the system specified default value is used. |
| ConnectionStatus | Specifies the status of the TCP connection between a device and the TACACS+ server. |
| Key | Secret key to be shared with this TACACS+ server. If the key length is zero that indicates no encryption is being used. |
| Priority | Determines the order in which the TACACS+ servers will be used. If more than one server shares the same priority, they will be used in lexicographic order (the order of entries in this table). |