Disabling MLT ports on Shutdown

Use this procedure to configure the system to disable MLT ports on shutdown.

Procedure steps
Step Action
1

From the navigation tree, click VLAN.
2

From the VLAN tree, click MLT/LACP.
3

Select the Globals tab.
4

Select the MltDisablePortsOnShutdown check box.
5

In the SmltSysId field, enter the LACP system ID for SMLT (MAC address).
6

On the tool bar, click Apply.
--End--

Variable definitions

The following table outlines the parameters for MLT.

Global tab MLT parameters

Variable Value
MltDisablePortsOnShutdown Disables or enables MLT Disable Ports on Shutdown.
SmltSysid Specifies the LACP system ID for SMLT as a MAC address.

Variable definitions

The following table outlines the parameters for LACP.

Global tab LACP parameters

Variable Value
CompatibilityMode

Specifies the port compatibility mode for LACP:

  • default
  • advanced

Variable definitions

The following table outlines the parameters for VLACP.

Global tab VLACP parameters

Variable Value
VlacpEnable Enables or disables VLACP on the switch.
VlacpMulticastMACAddress Identifies a multicast MAC address used exclusively for VLACPDUs. Default is 01:80:c2:00:11:00.