Configuring the SLPP PDU receipt threshold

This procedure describes the steps necessary to configure the number of SLPP PDUs, in the range 1 to 500, that must be received prior to shutting down a port as a result of looping. The default threshold is 5.

Prerequisites

Open one of the supported Web browsers.
Access the switch.
Click the Configuration arrowhead to open the navigation tree.

Use the following procedure to enable the SLPP PDU received function on a port:

Procedure steps

Step	Action


1	From the navigation tree, double-click VLAN.
2	From the VLAN tree, double-click SLPP.
3	Select the Ports tab.
4	Under the PktRxThreshold heading, select the port you want to modify.
5	Double click and enter the value for the threshold in the range 1 to 500.
6	Click Apply.
7	Click Close.

--End--