Use the following procedure to filter the Routes tab to display only the desired switch routes.
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-click IP Routing. |
| 2 |
In the IP Routing tree, double-click IP. |
| 3 |
In the work area, select the Routes tab. |
| 4 |
In the toolbar, click Filter.
The Filter dialog box appears. |
|
|
|
| --End-- | |
|
|
|
The following table describes the fields of the Filter tab.
| Field | Description |
|---|---|
| Condition | When using multiple filter expressions on the tab, this is the condition that is used to join them together. |
| Ignore Case | Denotes whether filters are case sensitive or insensitive. |
| Column | Denotes the type of criteria that will be applied to values used for filtering. |
| All Records | Clears the filters, and displays all rows. |
| Dest | Select this check box and enter a value to filter on the route destination value. |
| Mask | Select this check box and enter a value to filter on the route destination subnet mask value. |
| NextHop | Select this check box and enter a value to filter on the route next hop value. |
| HopOrMetric | Select this check box and enter a value to filter on the hop count or metric of the route. |
| Interface | Select this check box and enter a value to filter on the route’s associated interface. |
| Proto | Select this check box and enter a value to filter on the route protocol. |
| PathType | Select this check box and enter a value to filter on the route path type. |
| Pref | Select this check box and enter a value to filter on the route preference value. |