Prerequisites
Use the following procedure to open the Meter Capability tab.
Procedure steps
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-click QoS. |
| 2 |
From the QoS tree, double-click QoS Devices. |
| 3 |
Select the Meter Capability tab. |
|
|
|
| --End-- | |
|
|
|
The following table outlines the parameters of the Meter Capability tab.
QoS Devices Meter Capability tab parameters
| Variable | Value |
|---|---|
| Port | Specifies the port to which the meter is applied. |
| MeterSupport | Specifies the supported Token Bucket metering algorithm. |
| Meter Rate (Kbps)/Bucket (KBytes)/Granularity (Kbps) | Displays maximum supported Meter Rate, Meter Bucket size and Meter Granularity. |
Prerequisites
Use the following procedure to configure Meter Capability filtering.
Procedure steps
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-click QoS. |
| 2 |
From the QoS tree, double-click QoS Devices. |
| 3 |
Select the Meter Capability tab. |
| 4 |
Click the Filter button to set Meter Capability table view filtering criteria. The QOSDevice, Meter Capability - Filter dialog opens. |
| 5 |
Select filtering criteria and enter port, meter support, and meter rate parameters. |
| 6 |
To activate your selections, click the Filter button on the dialog, the Meter Capability window will display entries based on the filtering criteria specified. |
|
|
|
| --End-- | |
|
|
|
For more information, see QoS Devices Meter Capability tab parameters.