Viewing Shaper Capability

Prerequisites

Use the following procedure to open the Shaper Capability tab.

Procedure steps
Step Action
1

From the navigation tree, double-click QoS.
2

From the QoS tree, double-click QoS Devices.
3

Select the Shaper Capability tab.
--End--

Shaper Capability tab parameters

Variable Value
Port Displays the port number.
ShaperSupport Displays the shaper support as:
  • Interface
  • Cos (Class of Service)
Shaper Rate(Kbps)/Bucket(Kbytes)/Granularity(Kbps) Displays the
  • Shaper rate in Kilobytes per second
  • Bucket size in Kilobytes
  • Granularity in Kilobytes per second

Shaper Capability filtering

Prerequisites

Use the following procedure to configure Shaper Capability filtering.

Procedure steps
Step Action
1

From the navigation tree, double-click QoS.
2

From the QoS tree, double-click QoS Devices.
3

Select the Shaper Capability tab.
4

Click the Filter button to set Shaper Capability table filtering. The QOSDevice, Shaper Capability - Filter dialog opens.
5

Select filtering criteria and enter port, shaper support, and shaper rate parameters.

6

To activate your selections, click the Filter button on the dialog, the Shaper Capability window will display the entries based on the filtering criteria specified.
--End--