Prerequisites
Use the following procedure to open the Interface Action Ext tab.
Procedure steps
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-click QoS. |
| 2 |
From the QoS tree, double-click QoS. |
| 3 |
Select the Interface Action Ext tab. |
|
|
|
| --End-- | |
|
|
|
The following table outlines the parameters of the Interface Action Ext tab.
QoS Interface Action Ext tab parameters
| Variable | Value |
|---|---|
| Id | Specifies the number of the interface action extension. |
| Name | Specifies a label for the interface action extension. |
| SetEgressUnicastPort | Specifies redirection of normally-switched unicast packets to a specified interface. |
| SetEgressNonUnicastPort | Specifies redirection of normally-switched non-unicast packets (broadcast and multicast traffic) to a specified interface. |
| SessionId | Specifies the numerical identification for the current session. |
| Storage | Specifies the type of storage, either volatile or nonvolatile. |
This section contains information about the following topics:
Prerequisites
Use the following procedure to add a QoS interface action extension.
Procedure steps
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, double-click QoS. |
| 2 |
From the QoS tree, double-click QoS. |
| 3 |
Select the Interface Action Ext tab. |
| 4 |
Click Insert. The Insert Interface Action Ext screen opens. |
| 5 |
Enter the information and make the selections to use for this Interface action extension. |
| 6 |
Click Insert. |
|
|
|
| --End-- | |
|
|
|
Prerequisites
Use the following procedure to delete a QoS interface action extension.
Procedure steps
|
|
||
| Step | Action | |
|---|---|---|
|
|
||
| 1 |
From the navigation tree, double-click QoS. |
|
| 2 |
From the QoS tree, double-click QoS. |
|
| 3 |
Select the Interface Action Ext tab. |
|
| 4 |
Highlight the interface action extension to delete. |
|
| 5 |
Click Delete.
|
|
|
|
||
| --End-- | ||
|
|
||