Interface Apps configuration

Note:

Due to hardware limitations, the Ethernet Routing Switch 5500 Series switch supports only 11 interface applications per port.

Attention

This tab is only available when there exists ERS5500 unit, and it only allowed for ERS5500 ports.

Prerequisites

Use the following procedure to open the Interface Apps tab.

Procedure steps
Step Action
1

From the navigation tree, double-click QoS.
2

From the QoS tree, double-click QoS.
3

Select the Interface Apps tab.
--End--

Variable definitions

The following table outlines the parameters of the Interface Apps tab.

QoS Interface Apps tab parameters

Variable Value
IfIndex Specifies the ports that this QoS application applies to.
AppEnable Specifies the applications enabled for the interface (port) specified in IfIndex field.
DefaultGateway

Specifies the default gateway configured for the arpSpoofing application. The default gateway cannot be directly modified.

To modify the default gateway for the arpSpoofing application, do the following:

  1. Double-click the AppEnable field and de-select arpSpoofing.
  2. Click Apply.
  3. Double-click the AppEnable field, select arpSpoofing, and edit the DefaultGateway field.
  4. Click Apply.
IfType Specifies the interface type configured for the dhcpSnooping application.
DHCPServer

Specifies the DHCP server configured for the dhcpSpoofing application. The DHCP server cannot be directly modified.

To modify the DHCP server for the dhcpSpoofing application, do the following:

  1. Double-click the AppEnable field and de-select dhcpSpoofing.
  2. Click Apply.
  3. Double-click the AppEnable field, select dhcpSpoofing, and edit the DHCPServer field.
  4. Click Apply.

This section contains information about the following topics:

Adding an Interface Application

Prerequisites

Use the following procedure to add an Interface Application.

Procedure steps
Step Action
1

From the navigation tree, double-click QoS.
2

From the QoS tree, double-click QoS.
3

Select the Interface Apps tab.
4

Click Insert. The Insert Interface Apps screen opens.

5

In the fields provided, enter the information for the new entry.

6

Click Insert.

The new Interface Application entry is displayed on the Interface App tab.
--End--

Variable definitions

The following table outlines the parameters of the Insert Interface Apps dialog box.

QoS Insert Interface Apps dialog box parameters

Variable Value
Ports Click the ellipse button and select the ports to be configured for the QoS application.
AppEnable Select the applications enabled for the ports selected in the Ports field.
DefaultGateway Specifies the default gateway configured for the arpSpoofing application.
IfType Specifies the interface type configured for the dhcpSnooping application.
DHCPServer Specifies the DHCP server configured for the dhcpSpoofing application.

Deleting an Interface Application

Prerequisites

Use the following procedure to delete an Interface Application.

Procedure steps
Step Action
1

From the navigation tree, double-click QoS.
2

From the QoS tree, double-click QoS.
3

Select the Interface Apps tab.
4

Select the Interface Application to delete.
5

Click Delete.
--End--