Filter Limiting is enabled by default. If you have disabled Filter Limiting, use this procedure to enable the feature.
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the navigation tree, click QoS. |
| 2 |
From the QoS tree, click QoS. |
| 3 |
In the working area, click the Filter Limiting tab. |
| 4 |
Click the AdminEnabled check box to change the status. |
| 5 |
On the tool bar, click Apply. |
| 6 |
Reset the switch. |
|
|
|
| --End-- | |
|
|
|
Filter Limiting parameters
| Variable | Value |
|---|---|
| AdminEnabled | The filter limiting next-boot status, |
| OperEnabled | The filter limiting current status. This is a read only field. |