Variable definitions

Use the data in the following table to configure EAPOL globally.

Variable	Value
SystemAuthControl	Enables or disables port access control on the switch.
UserBasedPoliciesEnabled	Enables or disables EAPOL user-based policies. For more information about user-based policies, see Nortel Ethernet Routing Switch 5000 Series Configuration — Quality of Service (NN47200-504).
UserBasedPoliciesFilterOnMac	Enables or disables the filter on MAC addresses for user-based policies.
GuestVlanEnabled	Enables or disables the Guest VLAN.
GuestVlanId	Sets the VLAN ID of the Guest VLAN.
MultiHostAllowNonEapClient	Enables or disables support for non-EAPOL hosts on EAPOL-enabled ports.
MultiHostSingleAuthEnabled	Enables or disables Multiple Host Single Authentication (MHSA). When selected, non-EAPOL hosts are allowed on a port if there is one authenticated EAPOL client on the port.
MultiHostRadiusAuthNonEapClient	Enables or disables RADIUS authentication of non-EAPOL hosts on EAPOL-enabled ports.
MultiHostAllowNonEapPhones	Enables or disables Nortel IP Phone clients as another non-EAP type.
MultiHostAllowRadiusAssignedVlan	Enables or disables the use of RADIUS-assigned VLAN values in the Multihost mode.
MultiHostAllowNonEapRadiusAssignedVlan	Enables or disables the use of non-EAP RADIUS-assigned VLAN values in the Multihost mode.
MultiHostUseMostRecentRadiusAssignedVlan	Enables or disables the use of the most recent VLAN values assigned by the RADIUS server.
MultiHostEapPacketMode	Enables or disables the choice of packet mode (unicast or multicast) in the Multihost mode.
NonEapRadius PasswordAttributeFormat	Enables or disables setting the format of the Remote Authentication Dial-In User Service (RADIUS) Server password attribute for non-EAP clients.
NonEapUserBased PoliciesEnabled	Enables or disables non-EAP user-based policies.
NonEapUserBased PoliciesFilterOnMac	Enables or disables the filter on MAC addresses for non-EAP user-based policies.