| GuestVlanEnabled |
Enables or disables Guest VLAN functionality. |
| GuestVlanId |
Specifies the VLAN ID of the VLAN that acts as the Guest VLAN. The default is 0. The Guest VLAN ID can be between 0 and 4094.
| Attention Use 0 to indicate a global Guest VLAN ID.
|
|
| MultiHostEnabled |
Enables or disables Multiple Host/MAC support with Multiple Authentication (MHMA). |
| MultiHostEapMaxNumMacs |
Specifies the maximum number of EAPOL-authenticated clients allowed on this port. The default is 1. The maximum number can
be between 1 and 32.
|
| MultiHostAllowNonEapClient |
Enables or disables support for non-EAPOL clients using local authentication. |
| MultiHostNonEapMaxNumMacs |
Specifies the maximum number of non-EAPOL clients allowed on this port. The default is 1. The maximum number can be between
1 and 32.
|
| MultiHostSingleAuthEnabled |
Enables or disables Multiple Host with Single Authentication (MHSA) support for non-EAPOL clients. |
| MultiHostRadiusAuthNonEapClient |
Enables or disables support for non-EAPOL clients using RADIUS authentication. |
| MultiHostAllowNonEapPhones |
Enables or disables support for Nortel IP Phone clients as another non-EAP type. |
| MultiHostAllowRadiusAssignedVlan |
Enables or disables support for VLAN values assigned by the RADIUS server. |
| MultiHostNonEapAllowRadiusAssignedVlan |
Enables or disables support for non-EAP VLAN values assigned by the RADIUS server. |
| MultiHostUseMostRecentRadiusAssignedVlan |
Enables or disables the use of the most recent VLAN values assigned by the RADIUS server. |
| MultiHostEapPacketMode |
Specifies the mode of EAPOL packet transmission (multicast or unicast). |
| ProcessRadiusRequestsServerPackets |
Enables or disables the processing of RADIUS request server packets. |