Use this procedure to configure IGMP snoop, proxy, and IGMP parameters on a VLAN.
IGMP snoop and proxy are disabled by default.
| Attention With IGMP snoop, the QueryInterval, Robustness, and Version values must be the same as those configured on the interface (VLAN) of the multicast router (IGMP querier). |
Procedure steps
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the Device Manager menu bar, select VLAN > VLANs. The VLAN dialog box appears with the Basic tab displayed. |
| 2 |
Click the Snoop tab. |
| 3 |
To enable IGMP snoop for a VLAN, select true from the Enable column. |
| 4 |
To enable IGMP proxy for a VLAN, select true from the ReportProxyEnable column. |
| 5 |
To configure IGMP properties, modify the values in the boxes provided. |
| 6 |
Click Apply. |
|
|
|
| --End-- | |
|
|
|