Use this procedure to flush the IGMP router tables. This procedure also allows you to configure the router alert option and query interval on a VLAN.
| Attention The QueryInterval, Robustness, and Version values must be the same as those configured on the interface (VLAN) of the multicast router (IGMP querier). |
| Attention To maximize your network performance, Nortel recommends that you set the router alert parameter according to the version of IGMP currently in use:
|
Procedure steps
|
|
|
| Step | Action |
|---|---|
|
|
|
| 1 |
From the Device Manager menu bar, select IP Routing > IGMP. The IGMP dialog box appears. |
| 2 |
Click the Interface tab. The Interface tab appears. |
| 3 |
To flush the routing tables, select the desired flush option under the FlushAction column. |
| 4 |
To configure the IGMP properties, modify the values in the boxes provided. |
| 5 |
Click Apply. |
|
|
|
| --End-- | |
|
|
|