Configuring SSM for IGMP

Use this procedure to configure Source-Specific Multicast (SSM) for IGMP.

Procedure steps

From the navigation tree, double-click IP.
In the IP tree, click IGMP.
In the work area, click the Globals tab.
Select the DynamicLearning check-box to enable dynamic learning for the IGMP interface.

OR

Clear the DynamicLearning check-box to disable dynamic learning for the IGMP interface.
Select an AdminAction: radio button.
In the RangeGroup box, type an IP address.
In the RangeMask box, type a subnet mask.
Select a MulitcastFilterMode: radio button to enable or disable multicast filter mode.

Variable	Value
DynamicLearning	When selected, the switch can learn the multicast source dynamically from the IGMP proxy report.
AdminAction	Enables or disables SSM globally.
RangeGroup	Specifies the IP multicast group address range source IP address.
RangeMask	Specifies the subnet mask for the IP multicast group address range source IP address.
AvailableHardwareResources	Indicates the current available hardware resources.
MulticastFilterMode	Enables or disables IGMP multicast filter mode.