Viewing NTR test results

Use this procedure to view the results of an NTR test.

Procedure

  1. From the navigation tree, double-click Serviceability.
  2. In the Serviceability tree, double-click SLA Monitor.
  3. In the SLA Monitor work area, click the NTR tab.
  4. Click Results.
  5. Click the NTR Results Hidden tab.

NTR Results Hidden field descriptions

Name Description
OperStatus Indicates the success or failure status of the NTR test. Values include:

  • inProgress

    : test results not yet available

  • aborted

    : indicates a general test failure occurred

  • completed
SrcAddress Indicates source IPv4 address of the test packet.
SrcPort Indicates the source UDP port of the test packet.
DstAddress Indicates the destination UDP port of the test packet.
DstPort Indicates the destination UDP port of the test packet.
Dscp Indicates the DSCP value used in test packets.
TTL Indicates the maximum TTL value used during test execution.

The agent currently supports a maximum TTL of 32 for NTR tests. Generally speaking, a value of 32 indicates the TTL maximum was reached before the destination was reached.
HopCount Indicates the number of hops maintained for the test.
AbortData Indicates the reason for the failure of an NTR test execution.
CompletionData Indicates the actual test results, at the protocol level, that are used by the test source to determine the overall test results (if available).
CompletionSummary Provides a summary of the test results, i.e. test success (OK) or test failure (NA — No Response).
Comments?
March 2013
©2013, Avaya Inc. All Rights Reserved.