|
DefaultEapAll
|
Restores all EAP settings globally.
|
|
SystemAuthControl
|
Enables or disables port access control on the switch.
|
|
UserBasedPolicies Enabled
|
Enables or disables EAPOL user-based policies. For more information
about user-based policies, see Configuring Quality
of Service on Avaya Ethernet
Routing Switch 5000 Series,
NN47200-504.
|
|
UserBasedPoliciesFilterOnMac
|
Enables or disables the filter on MAC addresses for user-based
policies.
|
|
GuestVlanEnabled
|
Enables or disables the Guest VLAN.
|
|
GuestVlanId
|
Sets the VLAN ID of the Guest VLAN.
|
|
MultiHostAllow NonEapClient
|
Enables or disables support for non-EAPOL hosts on EAPOL-enabled
ports.
|
|
MultiHostSingle AuthEnabled
|
Enables or disables Multiple Host Single Authentication (MHSA).
When selected, non-EAPOL hosts are allowed on a port if there is one
authenticated EAPOL client on the port.
|
|
MultiHostRadiusAuth NonEapClient
|
Enables or disables RADIUS authentication of non-EAPOL hosts on
EAPOL-enabled ports.
|
|
MultiHostAllowNonEapPhones
|
Enables or disables Avaya IP Phone clients as another non-EAP type.
|
|
MultiHostAllowRadiusAssignedVlan
|
Enables or disables the use of RADIUS-assigned VLAN values in the
Multihost mode.
|
|
MultiHostAllowNonEapRadiusAssignedVlan
|
Enables or disables the use of non-EAP RADIUS-assigned VLAN values
in the Multihost mode.
|
|
MultiHostUseMostRecentRadiusAssignedVlan
|
Enables or disables the use of the most recent VLAN values assigned
by the RADIUS server.
|
|
MultiHostMultiVlan
|
Enables or disables the multiple VLAN capability for EAP and non-EAP
hosts The default is disabled.
|
|
MultiHostEapPacketMode
|
Enables or disables the choice of packet mode (unicast or multicast)
in the Multihost mode. Default is multicast.
|
|
MultiHostEapProtocolEnabled
|
Enables or disables the processing of EAP protocol packets.
|
|
MultiHostFailOpenVlanEnabled
|
Enables or disables the fail-over Vlan.
|
|
MultiHostFailOpenVlanId
|
Specifies the ID of the global fail-over Vlan.
|
|
MultiHostFailOpenVlanContinuityModeEnabled
|
Enables or disables Fail Open VLAN Continuity mode.
|
|
NonEapRadiusPasswordAttributeFormat
|
Enables or disables setting the format of the Remote Authentication
Dial-In User Service (RADIUS) Server password attribute for non-EAP
clients.
|
|
MultiHostNonEapRadiusPasswordFreeformKey
|
Specifies the RADIUS password key.
|
|
Confirm MultiHostNonEapRadiusPasswordFreeformKey
|
Confirms the RADIUS password key.
|
|
NonEapUserBasedPoliciesEnabled
|
Enables or disables non-EAP user-based policies.
|
|
NonEapUserBasedPoliciesFilterOnMac
|
Enables or disables the filter on MAC addresses for non-EAP user-based
policies.
|
|
MultiHostNeapReauthenticationEnabled
|
Enables or disables NEAP reauthentication.
|
|
MultiHostBlockDifferentVlanAuth
|
Enables or disables the block subsequent MAC authentication feature.
|