ContentsPrint

Configuring ports for VLAN membership

Use this procedure to configure one or more switch ports for VLAN membership.

Procedure

  1. From the Device Physical View, select one or more ports.
  2. From the navigation tree, double-click Edit.
  3. In the Edit tree, double-click Chassis.
  4. In the Chassis tree, click Ports.
  5. Click the VLAN tab.

VLAN field descriptions

Name Description
Index Indicates the switch position in the stack and the port number. This is a read-only value.
VlandIds Indicates the VLAN IDs of which this port is a member. This is a read-only value.
DiscardUntaggedFrames Indicates how untagged frames received on this port are processed.

  • true: untagged frames are discarded by the forwarding process

  • false: untagged frames are assigned to the VLAN specified by the VLAN ID.

This column applies to trunk ports only.
FilterUnregisteredFrames Indicates how unregistered frames received on this prot are processed.

  • true: unregistered frames are discarded by the forwarding process

  • false: unregistered frames are assigned to the VLAN specified by the VLAN ID.

This column applies to access ports only.
DefaultVlanId Indicates the VLAN ID assigned to untagged and unregistered frames received on a port.
PortPriority Indicates the port priority for the switch to consider as it forwards received packets. Values range from 0 to 7.
Tagging Indicates the type of VLAN port. Possible values are:

  • untagAll (access)

  • tagAll (trunk)

  • untagPvidOnly

  • tagPvidOnly

If the port is a trunk port, the port is often a member of more than one VLAN. If the port is an access port, the port can only be a member of one VLAN.
Comments on this document?
October 2015
© 2012-2015, Avaya, Inc. All Rights Reserved.