 |  |
Configuring SSM for IGMP
Use this procedure to configure Source-Specific Multicast (SSM) for IGMP.
Procedure steps
From the navigation tree, double-click IP.
In the IP tree, click IGMP.
In the work area, click the Globals tab.
Select the DynamicLearning check-box to enable dynamic learning for the IGMP interface.
OR
Clear the DynamicLearning check-box to disable dynamic learning for the IGMP interface.
Select an AdminAction: radio button.
In the RangeGroup box, type an IP address.
In the RangeMask box, type a subnet mask.
Select a MulitcastFilterMode: radio button to enable or disable multicast filter mode.
Variable definitions
| Variable | Value |
|---|---|
| DynamicLearning | When selected, the switch can learn the multicast source dynamically from the IGMP proxy report. |
| AdminAction | Enables or disables SSM globally. |
| RangeGroup | Specifies the IP multicast group address range source IP address. |
| RangeMask | Specifies the subnet mask for the IP multicast group address range source IP address. |
| AvailableHardwareResources | Indicates the current available hardware resources. |
| MulticastFilterMode | Enables or disables IGMP multicast filter mode. |