 |  |
Displaying the PoE information for a unit
Use this procedure to display PoE information for a single unit.
 | Note |
You can only view PoE parameters by selecting a single unit. |
Procedure
- In the Device Physical View, select the unit.
- From the navigation tree, double-click Edit.
- From the Edit tree, click Unit.
- Select the PoE tab.
PoE field descriptions
The following table outlines the parameters of the PoE tab.
| Name | Description | ||||
|---|---|---|---|---|---|
| Power | Displays the total power available to the Avaya Ethernet Routing Switch. | ||||
| OperStatus | Displays the power state of the Avaya Ethernet Routing Switch
|
||||
| Consumption Power | Displays the power being used by the Avaya Ethernet Routing Switch. | ||||
| UsageThreshold | Enables you to set a percentage of the total power usage of the Avaya Ethernet ROouting Switch based on which system sends a trap.
|
||||
| Notification Control Enable | Enables you to enable or disable sending traps if the switch's power usage exceeds the percentage set in the Usage Threshold field. | ||||
| PowerDeviceDetectType | Enables you to set the power detection method that the switch uses to detect a request for power from a device connected to all ports on the switch:
|