ContentsPrint

Viewing LLDP local PoE PSE properties

Use this procedure to view LLDP PoE PSE properties for the local system.

Procedure steps

  1. From the navigation tree, double-click Edit.

  2. From the Edit tree, double-click Diagnostics.

  3. From the Diagnostics tree, double-click 802.1AB.

  4. From the 802.1AB tree, double-click Port MED.

  5. Select the Local PoE PSE tab.

The following table outlines the parameters of the Port MED Local PoE PSE tab.

Table 1. Variable definitions
Variable Value
PortNum Specifies the port number.
PSEPortPowerAvailable Specifies the value of the power available (in units of 0.1 watts) from the PSE through this port.
PSEPortPDPriority Indicates the PD power priority that is advertised on this PSE port:

  • unknown: priority is not configured or known by the PD

  • critical: the device advertises its power priority as critical, see RFC 3621

  • high: the device advertises its power priority as high, see RFC 3621

  • low: the device advertises its power priority as low, see RFC 3621
Parent topic: LLDP Port MED configuration using Enterprise Device Manager
Comments on this document?
October 2015
© 2012-2015, Avaya, Inc. All Rights Reserved.