Viewing LLDP local system properties

Use this procedure to view LLDP local system properties.

Procedure steps

From the navigation tree, double-click Edit.
From the Edit tree, double-click Diagnostics.
From the Diagnostics tree, double-click 802.1AB.
From the 802.1AB tree, click LLDP.
Select the Local System tab.

The following table outlines the parameters of the Local System tab.

Table 1. Variable definitions
Variable	Value
ChassisIdSubtype	Specifies the type of encoding used to identify the local system chassis: chassisComponent interfaceAlias portComponent macAddress networkAddress interfaceName local
ChassisId	Specifies the chassis ID
SysName	Specifies the local system name
SysDesc	Specifies the local system description
SysCapSupported	Identifies the system capabilities supported on the local system
SysCapEnabled	Identifies the system capabilities that are enabled on the local system
DeviceClass	Specifies the local MED device class
HardwareRev	Specifies the vendor-specific hardware revision string as advertised by the local device
FirmwareRev	Specifies the vendor-specific firmware revision string as advertised by the local device
SoftwareRev	Specifies the vendor-specific software revision string as advertised by the local device
SerialNum	Specifies the vendor-specific serial number as advertised by the local device
MfgName	Specifies the vendor-specific manufacturer name as advertised by the local device
ModelName	Specifies the vendor-specific model name as advertised by the local device
AssetID	Specifies the vendor-specific asset tracking identifier as advertised by the local device
DeviceType	Defines the type of Power-via-MDI (Power over Ethernet) advertised by the local device: pseDevice: indicates that the device is advertised as a Power Sourcing Entity (PSE). pdDevice: indicates that the device is advertised as a Powered Device (PD) none: indicates that the device does not support PoE
PSEPowerSource	Defines the type of PSE Power Source advertised by the local device: primary: indicates that the device advertises its power source as primary backup: indicates that the device advertises its power source as backup
PDPowerReq	Specifies the value of the power required (in units of 0.1 watts) by a Powered Device (PD)
PDPowerSource	Defines the type of power source advertised as in use by the local device: fromPSE: indicates that the device advertises its power source as received from a PSE local: indicates that the device advertises its power source as local localAndPSE: indicates that the device advertises its power source as using both local and PSE power
PDPowerPriority	Defines the priority advertised as required by this PD: critical: indicates that the device advertises its power priority as critical, see RFC 3621 high: indicates that the device advertises its power priority as high, see RFC 3621 low: indicates that the device advertises its power priority as low, see RFC 3621