 |  |
Viewing traffic profile sets
Use this procedure to open the Set tab.
Procedure steps
In the navigation pane, double-click QoS.
Click QoS UBP/Traffic Profile.
Select the Set tab.
Variable definitions
The following table outlines the parameters of the Set tab.
| Variable | Value |
|---|---|
| AclType | Specifies the type of ACL (UBP, or Traffic Profile). |
| Name | Specifies a name for this entry. The name must be an existing classifier name. All classifiers with this name are part of this filter set. The filter set itself has this name. |
| IfIndex | Specifies the logical interface index assigned to the VLAN or the physical interface. |
| MeteringMode |
Specifies the Traffic Profile Metering Mode as:
|
| CommittedRate | Specifies the committed rate (in Kbps). |
| BurstSize | Specifies the maximum number of bytes in a single transmission burst. |
| OutActionDrop |
Specifies the action to take when packet is out-of-profile.
This action is applied only if metering is being enforced, and if the traffic is deemed out-of-profile based on the level of traffic and the metering criteria. (Metering is applied only to traffic matching the filtering data.) Options are the following:
|
| StatsType |
Values include:
|
| OutActionUpdateDscp |
Specifies the action to take to update DSCP when a packet is out-of-profile.
The default value is -1. The value range is between -1–63. |
| SetPriority | Specifies the priority in the range 1–255. You can only change this field for a User Based Policy set. |
| Status | Enables or disables the Traffic Profile set policy. |
| Storage | Specifies the type of storage for this entry. |
This section contains information about the following topics:
Graphing a QoS traffic profile set
Use this procedure to graph QoS traffic profile set statistics.
Procedure
- From the navigation tree, double-click QoS.
- In the QoS tree, click Qos UBP/Traffic Profile.
- In the QoS UBP/Traffic Profile work area, click the Set tab.
- Select traffic profile set to graph.
- On the toolbar, click Graph.