Use this procedure to create an entry in the multicast-static IP routing table.
From the navigation pane, double-click IP.
In the IP tree, click IP.
In the IP work area, click the Static MRoutes tab.
On the toolbar, click Insert.
Configure the parameters as required.
Click Insert.
| Variable | Value |
|---|---|
| IpAddressType | Specifies the type of IP Address (ipv4). |
| IpAddress | Specifies the IP address of the destination network. |
| Mask | Specifies the mask of the destination network. |
| RpfAddressType | Specifies the type of address for the reverse path forwarding address (ipv4). |
| RpfAddress | Specifies the reverse path forwarding address. |
| Preference | Specifies the administrative distance of the static multicast route |