Viewing topology table information

To view more topology information:

Procedure steps

  1. From the navigation tree, double-click Edit.

  2. From the Edit tree, double-click Diagnostics.

  3. From the Diagnostics tree, double-click Topology.

  4. Select the Topology Table tab.

The following table outlines the parameters of the Topology Table tab.

Table 1. Variable definitions
Variable Value
Slot The slot number in the chassis in which the topology message was received.
Port The port on which the topology message was received.
IpAddr The IP address of the sender of the topology message.
SegId (Slot/Port) The segment identifier, slot , and port number from where the autotopology packets were received.
MacAddr The MAC address of the sender of the topology message.
ChassisType The chassis type of the device that sent the topology message.
BkplType The backplane type of the device that sent the topology message.
LocalSeg Indicates if the sender of the topology message is on the same Ethernet segment as the reporting agent.
CurState
The current state of the sender of the topology message. The choices are:

  • topChanged: Topology information has recently changed.

  • heartbeat: Topology information is unchanged.

  • new: The sending agent is in a new state.
Comments?
August 8, 2012
©2012, Avaya Inc. All Rights Reserved.